RF Engineers
Senior RF Design Engineer, Dorset, £30-40k
An engineer is sought with 2 - 5 years experience in design and development of VHF/UHF radio equipment in a commercial environment. Experience of designing military equipment or HF and Microwave would be beneficial.
Antenna & RF/Microwave Engineers, Kent, £23-35k
A designer and manufacturer of vehicles antenna systems is currently expanding its design centre and is therefore seeking engineers with a background in either antenna design or RF/Microwave design.
RF Design Engineers, Hants, £25-30k
Engineers with 3 years experience are sought to design low power (1GHz) radio transmitters and receivers in the HF - UHF range.
RF Hardware Design, Somerset, £22-29k
Applicants should be degree qualified with electronic design experience covering basebine signal processing to 2MHz, low noise transmitter systems (KHz), power supplies (including 3 phase) and low RF up to 40 MHz.
Radio Engineers, Herts, £18-40k
Our client has several positions at all levels for engineers with 2.i/1st class honours degrees. Any knowledge of the following is desired :- mobile comms, GSM, CT1, CT2, DECT, amplifiers, mixers, synthesisers or RF ASIC.
Antenna Design, Surrey, £22-32k
Applicants should have 5 years RF experience with 2 years specific antenna experience (ideally at 1-3GHz) with knowledge of antenna manufacturing and testing techniques. Knowledge of mobile communications systems & protocols is desirable.
RF / Senior RF Engineers, Yorks, £20-36k
We are currently looking for engineers who are educated to degree level in a relevant subject and have 1 year or more post grad experience in RF design. Good communication and team skills are needed.
Senior RF Hardware Engineer, Northants, £29-40k
A manufacturer of electronic countermeasure and surveillance equipment has a vacancy for a senior engineer with a good degree and 5 years experience with several of the following :- RX/TX up to 2GHz, synthesiser/PLL design, VCOs, LNAs, Filters, GSM, GPS or DSPs.
Microwave / RF Design Engineer, Hants, £18-30k
Engineers are sought to design and test MIC and GaAs MMIC circuits such as low noise amplifiers, phase and gain control circuits, oscillators and power amplifiers with operating frequencies up to 100GHz
RF Engineers, Berks £23-32k
RF Design Engineers of all levels are sought by many companies around the
UK. General skills sought are as follows :- RD design up to
2GHz, filters, receivers, transmitters, PLL's, Antenna design, oscillators,
and comparators.
RF Engineers, West Sussex, £23-30k
At least 2 years experience in the design and development of RF systems
upto 5000MHz using some of the following skills:- Synthesisers, high-speed
digital, ORCAD, Pspice, MathCAD, project planning
RF Design Engineer, Middlesex, £14k-25k
Our client is looking for RF Design Engineers to expand its capability
in digital radio design. Knowledge of RF up to 5.8 GHz, FSK, BPSK
and QPSK are desired
Principal Engineer (Mobile Satellite), Berkshire
An engineer is required to lead small team engaged in the development of
mobile satellite communications projects.
Teams are multi-disciplinary involving RF, software, system and digital
hardware skills.
The successful candidate will be a Bsc (Hons) graduate with over 6 years
experience covering three of these areas :-
-
RF circuit design up to L-Band
-
DSP software development using C or DSP56000 assembler
-
Mobile satellite earth station development
-
Analogue & Digital circuit desigs for communications equipment
-
Team leadership experience
-
Use of CAD tools
-
Project Management
RF Team Leader, Berkshire
Working on the development of precision test and measurement instrumentation,
the post holder will be responsible for the management of a team of 10
engineers developing the RF sections of digital mobile radio test equipment.
Successful candidates will have an understanding of RF techniques, knowledge
of digital hardware, and some understanding of software.
RF Engineer, Cambridge
A company specialising in the design and development of advanced communications
and video systems require RF engineers.
With a degree and knowledge of frequency synthesis, oscilator design,
or radio performance simulation, you will have 2 or more years experience
working on frequencies up to and beyond 1GHz.
Microwave Design Engineer, Devon
A microwave design engineer is required to join a small team in the development
of microwave systems. The position involves the use of computer modelling
and simulation packages in order to test out theoretical models against
real situations.
The ideal applicnt will have gained 2 to 5 years experience designing
antennae and passive microwave components, and enjoys development, moddeling
and research.
RF Design Engineer, London, £25k
Our client is a designer and manufacturer of a wide range of radio equipment.
Due to expansion they now seek to employ ambitious and experienced graduates
with the following skills :-
-
RF design of VHF and UHF low power Radio Data Transceivers (not microwave)
-
Digital Modulation Techniques
-
Synthesiser Design
-
Analogue Circuit Design
-
Production of Design Specifications / Test Specifications
-
Ability to liase with customers, component suppliers, and production staff
-
Ability to take projects from feasibility/prototype stage to production
RF Development Engineer, Essex
An RF development engineer is required to join a team engaged in the development
of HF 'over the horizon' Radar products, including High Performance Amplifiers,
Digitally implemented Receivers and Drivers, and high performance signal
generation and distribution systems. These "World Class" products use leading
edge technology and novel techniques to achieve unrivalled performance.
The succefssful candidate will appreciate the need for full development
documentation including theoretical design analysis and support documentation,
Engineering Design Specifications, Test Plans and associated Test Specifications.
He/She will have experience of production liason and be capable of interfacing
with te design office, project office, manufacturing and test departments.
The position includes RF design for HF products including filters, RF
detectors, broadband amplifiers and mixers with low phase noise, low hum
and low spurious levels. Applicants must have the following experience
:-
-
Degree a in related subject
-
4 years HF product design
-
1 year Amplifier design (60MHz to 100MHz) up to 2W
-
2 years Production liason and interfacing with design support departments
It is also desirable that applicants have one years expereince of :-
-
Working to MIL standard specifications
-
Providing requirements analysis and traceability
-
Use of Wordperfect and Lotus 123
-
Use of RF simulation packages
Analogue / Microwave Design Engineer, Essex, £18k - £20k
An experienced engineer (with a minimum of 5 years experience) is needed
by our client. Applicants should have a broad up to date knowledge of RF
and analogue for both Global Distress Safety Systems and Radar Navigation
equipment.
the successful candidate will be able to offer a proven design capability
in the following areas :-
-
RF through VHF
-
IF techniques
-
Log / Linear receivers
-
Analogue Interfaces
-
Antennas - Near/Far-field Measurements
-
CAE Modelling - Applications and Limitations
-
Radar Systems - Basic Theory / Operation / RFI/EMC
-
Measurements - Networks Analysis / Spectrum Analysis / Instrument Control
A Working knowledge of modern ECAD techniques would be an advantage, as
would a BSc (Hons) in electronic Engineering
RF Engineers, Hampshire, £18k - £27k
Degree qualified with 2 to 4 years experience of RF circuit and system
design (receivers, synthesisers or transmitters) up to 1GHz. The ability
to design for production is essential and experience of taking product
development into production is desirable.
A sound understanding of general analogue and digital design techniques
would be usefull. Knowledge and experience of Telepoint/Cellular products
would be advantageous but is not essential.
The successful candidate will be working on existing, new and future
Telepoint and radio base station infrastructure products, this would involve
:-
-
Specification, design and development of RF circuits and systems.
-
RF component specification and evaluation
-
RF component, sub-system and transceiver testing
-
Circuit design, integration, problem solving and investigation
This position has a high practical work content and therefore practical
design experience is required.
Antenna Development Engineer, Middlesex
Design / develop antennas and/or radomes for a wide variety of broadbvand
RF and microwave systems up to 100GHz. Using and writing software to support
the design process, use of teh in-house CAD / CAM facilities, preparation
of all documentation associated with developing designs through to production.
Thorough knowledge of antenna test methods and associated problems is
required. Programme and cost management of antenna development work packages.
Prepareation of technical proposals and costed programmes for future business.
Aged 26 years plus, with a BSc / MSc in Electrical / Electronic engineering
or Physics with a minimum of 5 years experience in the design and development
of broadband antennas and/or randomes. You should be computer literate
with the ability to writye software in Fortran, Visual Basic, or C/C++.
Radio Communications Systems Engineer, Berks, £20k - £25k
Our client is ;looking to recruit Systems Engineers for their Systems Engineerig
Department. Ideally the successful candidate should have a degree / HND
in Electronic Engineering, have five years experience, preferably in radio
related disciplines, and experience of communications systems design for
a variety of installations both fixed and mobile, is preferable but not
essential. Ability to work under pressure as part of a team and with a
flexible change of task wil be essential.
Duties include design of radio systems (HF, VHF, UHF, SHF) to fulfill
cantract requirements, and will involve the definition of system inter
connections abd interface considerations. The candidate will be expected
to liase with a variaty of development departments, marketing and customers.
3 Branksome Way, New Malden, Surrey, KT3 3AX
Tel : 0181 - 549 0100 or Fax: 0181 - 549 9771
email : consult@applerec.u-net.com